Skip to content

Mural Installation for North Lauderdale Homes

The short answer

A mural project in North Lauderdale moves through four stages: choosing the image and size, preparing the wall, laying out the panels and hanging them in sequence. Careful sizing and a smooth, dry wall make the biggest difference.

A wallpaper mural turns one wall into a picture: a quiet beach at dawn, rows of tropical foliage, a starry sky over a child's bed, or an enlarged family photo printed to size. Getting that image to look like it was painted directly on the wall depends on planning that starts well before the first panel is pasted. True Wallpaper Installation installs murals in North Lauderdale and ZIP 33068, roughly seven miles northwest of our Fort Lauderdale base. This page follows a mural project from the first idea to the finished wall, with practical notes for the homes and climate in this corner of Broward County.

Stage one: picking the image and the wall

Start by asking how the room is used. A mural behind a home-office desk doubles as a video-call background, so a calm, uncluttered scene tends to work better than a busy one. In a child's room, a fun theme that can grow with them, like a world map or an outdoor scene, lasts longer than a character print they may outgrow. In a living room, the mural usually sits on the wall that faces the main seating.

Next, look at the wall itself. Fewer interruptions mean a stronger result. A wall with one door at the edge is fine; a wall with a window, a thermostat and two outlets in the middle will slice the image apart.

Stage two: sizing and ordering

Many murals are printed to order, so measurement mistakes are hard to undo. We measure width at the top, middle and bottom, and height at both ends and the center, because walls in older North Lauderdale homes are rarely perfectly square. The order should include extra margin on every side so the image can be trimmed to the real wall rather than squeezed onto it.

If the mural is already on hand, we unpack it and check panel count, numbering and print quality on the floor before anything touches the wall.

Stage three: preparing the surface

A mural shows the wall beneath it more clearly than patterned paper. Smooth skies, soft gradients and solid color fields reveal bumps, tape lines and patched spots. Our preparation is thorough for that reason.

  • Remove outlet covers, switch plates and wall-mounted items
  • Fill holes and cracks, and sand old repairs flush
  • Skim-coat textured walls so the print lies flat
  • Test exterior concrete-block walls for moisture
  • Prime with a product compatible with the mural's backing

Stage four: layout and hanging

With the wall ready, we decide exactly where the image will sit, confirming with you which details should land above a headboard or centered on a sofa. A plumb line based on that layout guides the first panel. Corners are ignored as a reference, since they are seldom true.

Each panel goes up in numbered order. We align the image at eye level first, work out air and excess paste from the center, and roll each seam. When the full image is in place, we trim the top and bottom together for even margins, cut neatly around openings and reinstall the plates. Self-adhesive murals follow the same layout, with backing peeled gradually to avoid creases.

Keeping a mural flat in a humid climate

North Lauderdale's climate has no fully dry season, and May through October is especially hot and wet. Mural materials respond to humidity during and after hanging, so we ask that the air conditioning stay on and doors to the outside stay closed while the adhesive cures. A mural on an exterior block wall should not be blocked by furniture pressed tight against it, which can trap moisture.

During hurricane season we watch the forecast and will reschedule if a storm is headed toward Broward County.

Also nearby

Our mural work also covers Tamarac, Lauderdale Lakes, Lauderhill, Sunrise and Oakland Park.

More services in North Lauderdale

Related

What to expect

How a visit goes

  1. Honest wall assessment

    If a surface needs stripping, skim coating or time to dry, we tell you before work begins, not halfway through.

  2. Careful layout

    We measure, plan the repeat and decide where the pattern starts so motifs line up across corners, doors and windows.

  3. A clean finish

    Seams are tight, edges are trimmed cleanly at trim and ceilings, and the room is left tidy with care tips for your new walls.

FAQ

Common questions

Can you install a photo I had printed as a mural?

Yes, as long as it is printed on a wallcovering material in panels. We check the print and backing before hanging.

What if the mural is slightly too small?

We can center it and finish the edges with paint or a coordinating paper, or advise on reordering.

Do murals come off easily later?

Non-woven and peel-and-stick murals usually come off cleanly from primed walls. Vinyl may leave a backing to soak off.

Can a mural go in a bathroom?

A vinyl mural rated for humidity can, provided it is away from direct shower spray and the room has a working fan.

How long does installation take?

Most single-wall murals take one visit. Extra prep for textured or damaged walls may add time.

Which areas around North Lauderdale do you serve?

Tamarac, Lauderdale Lakes, Lauderhill, Sunrise and Oakland Park.

Ready to plan your wallpaper project?

Tell us about the room, the paper you have in mind and the condition of the walls. We will follow up to look at the space and map out the work.

(912) 873-9767
Call (912) 873-9767 Request Service