Skip to content

Wall Mural Installation in Oakland Park, Florida

The short answer

We install printed wallpaper murals in Oakland Park, including custom-sized prints and stock designs. Accurate wall measurements before you order, a smooth primed surface and careful panel alignment are what make a mural look seamless.

A wallpaper mural is a single large image printed across a set of numbered panels, and it only works if every panel lines up exactly with the one beside it. A palm canopy, a faded map, a watercolor shoreline or a child's jungle scene can turn one wall of an Oakland Park home into the focus of the room, but a half-inch drift at panel three becomes an obvious break by panel six. That is why murals reward planning more than speed. We hang them in homes and condos across ZIP 33334, about two miles northwest of where we are based in Fort Lauderdale, and we treat measuring and layout as the most important part of the job.

Measure first, order second

Most mural makers print to the dimensions you give them, adding a small bleed around the edges. Walls in older Broward homes are rarely perfectly square, and a ceiling that dips a quarter inch across twelve feet affects where the top of the image lands. We prefer to measure the wall ourselves at several points before you place the order, so the printed size accounts for out-of-plumb corners and uneven ceilings.

We also look at what the image will hit. Light switches, vents, a thermostat or a doorway can fall right on a face or a focal point. Shifting the image a few inches left or up before printing is far easier than living with a vent in the middle of a sunset.

  • Measure width at the top, middle and bottom; height at both ends and the center
  • Ask the printer for extra bleed if the wall is noticeably out of square
  • Confirm the panel numbering and the order the maker intends them hung
  • Decide whether the image should wrap around a corner or stop at it

Choosing a mural material for this climate

Murals come on several substrates. Non-woven prints are our usual recommendation for Oakland Park homes, because they hold their size when humidity shifts and they come off the wall cleanly later. Vinyl-coated murals resist moisture and wipe clean, which makes them a sensible choice for a kids' room or a covered patio-adjacent space that stays cooled. Self-adhesive murals are convenient but tend to release in warm rooms and on any wall with texture.

During the wet season, a room that loses AC for a day can swing in humidity quickly. A stable substrate keeps panels from shrinking at the seams after the air comes back on.

Getting the wall mural-ready

Large photographic images show every bump. Concrete-block exterior walls finished with plaster, common in Oakland Park's mid-century homes, often have trowel marks and old anchors that need filling. We patch, sand, skim where needed and apply a wallcovering primer, tinted toward white if the mural has light areas, so old paint colors do not shadow through the print.

A plumb line is snapped for the first panel rather than trusting the corner. From there, every panel is matched to the image itself, not to the edge of the wall.

Popular spots for a mural in Oakland Park houses

Murals make the most sense on walls that are seen straight-on and are mostly unbroken. In the compact layouts typical here, that is often the wall facing the front door, the wall behind a bed, a home office background that appears on video calls, or one wall of a child's room. A short hallway end wall can also carry a scenic image that makes the hall feel longer.

We also hang murals for clients in Wilton Manors, Lauderdale Lakes, Lauderdale-by-the-Sea, Pompano Beach and Lauderhill, and the same measure-first approach applies everywhere.

After installation

Keep the room cooled steadily for a few days while the adhesive sets. Avoid taping or pinning things to the mural, and wipe vinyl-coated surfaces with a soft damp cloth only. If you kept a spare panel or ordered a reprint option from the maker, store it flat in a dry closet indoors, not in a hot garage.

More services in Oakland Park

Related

What to expect

How a visit goes

  1. Honest wall assessment

    If a surface needs stripping, skim coating or time to dry, we tell you before work begins, not halfway through.

  2. Careful layout

    We measure, plan the repeat and decide where the pattern starts so motifs line up across corners, doors and windows.

  3. A clean finish

    Seams are tight, edges are trimmed cleanly at trim and ceilings, and the room is left tidy with care tips for your new walls.

FAQ

Common questions

Can you install a mural I bought online?

Yes. Most clients buy their own mural. We recommend sending us the product link and letting us measure before you finalize the size.

What if my wall is not square?

Most walls are not. We measure at several points, plan the bleed and hang to a plumb line so the image reads straight even if the corners are not.

Can a mural wrap around a corner?

It can, though the image will bend at the corner. We usually suggest stopping at the corner unless the design was made to wrap.

Is peel-and-stick fine for a mural?

It can work on very smooth walls in rooms that stay cool, but it is more likely to lift in South Florida heat. Non-woven paste-the-wall murals are more reliable.

How long does a mural install take?

A typical single-wall mural is done in one visit after prep, though walls needing heavy repair may need an extra day for patching to dry.

Can a mural be removed later?

Non-woven murals on a primed wall usually strip off in whole panels, leaving the wall ready for paint or a new design.

Ready to plan your wallpaper project?

Tell us about the room, the paper you have in mind and the condition of the walls. We will follow up to look at the space and map out the work.

(912) 873-9767
Call (912) 873-9767 Request Service