Skip to content

Wall Mural Installation in Lauderdale Lakes

The short answer

Mural installation means lining up a one-off image panel by panel, so measuring and layout matter more than speed. We check the panels against your wall, plan where the focal point sits, prepare a smooth surface and hang in sequence.

A wallpaper mural is a single large image printed across a set of numbered panels: a palm canopy, a misty forest, a city skyline, a map, an abstract wash of color. Unlike repeating wallpaper, there is only one correct place for every panel, and a mistake of a fraction of an inch at the first seam can throw off a horizon line by the far corner. Homeowners in Lauderdale Lakes call True Wallpaper Installation, based about four miles east in Fort Lauderdale, when they want that image to land straight, centered and seamless on the wall they picked.

Measure first, order second

Most mural problems start before the box arrives. Many manufacturers print to the exact size you enter, and some add only a small bleed. Walls in Lauderdale Lakes homes are rarely perfectly square, especially in older block houses where ceilings dip or corners lean. We measure width at several heights and height at several points, then suggest the order size with enough extra on each side to trim to the real wall.

If you already ordered, that is fine. We lay the panels out on the floor before touching the wall to confirm the count, sequence and image size, and to spot any printing defects while there is still time to request a replacement.

Deciding where the image sits

A mural should look composed with the room, not just stuck to the wall. We talk through where the bed, sofa, TV or desk will be, then position the key element of the picture accordingly. A sunset should not disappear behind a headboard. A child's world map works better with the continents above furniture height.

We also think about doorways, outlets and thermostats. Cutting around them is normal, but if the most important part of the scene falls on a light switch, we shift the layout before the first panel goes up.

Surface preparation for a single image

Large-format prints are unforgiving. Texture that would hide under a busy small-scale pattern becomes obvious under a smooth photographic sky. We fill, sand and if necessary skim-coat the wall, then prime it with a product suited to the mural material, whether that is non-woven, vinyl, fabric-backed or self-adhesive.

For exterior concrete-block walls we run a moisture check first. A damp spot behind a mural can bubble the print and is hard to fix without replacing a whole panel.

  • Remove plates and fixtures in the mural area
  • Repair cracks and drywall tape lines
  • Smooth knockdown or orange-peel texture
  • Prime with a product matched to the mural backing

Hanging panel by panel

We snap a plumb line for the first panel based on the layout, not on the corner, because corners are seldom true. Each panel goes up in order, with seams butted or overlapped as the maker specifies, and the image is matched at eye level first where any shift would be most noticeable. Air is worked out from the middle, edges are rolled, and trimming waits until the full image is in place so we can balance the excess top and bottom.

Peel-and-stick murals follow the same layout logic, but the backing comes off a little at a time to avoid wrinkles and stretching.

Rooms that work well for murals in Lauderdale Lakes

Bedrooms, nurseries, home offices and the main living wall are the most common choices. In condos, a mural on the wall facing the balcony door can echo the outdoors without blocking light. Dining areas suit landscape scenes because the image is viewed from a seated distance.

Bathrooms are possible with vinyl murals designed for humidity, but we steer away from walls hit directly by shower spray. In homes that sit empty for part of the summer, steady cooling helps any mural stay flat through the wet, hot months from May to October.

Where else we install

Our mural work extends from Lauderdale Lakes into Lauderhill, Oakland Park, North Lauderdale, Sunrise and Wilton Manors, all within easy reach of our Fort Lauderdale base in Broward County.

More services in Lauderdale Lakes

Related

What to expect

How a visit goes

  1. Honest wall assessment

    If a surface needs stripping, skim coating or time to dry, we tell you before work begins, not halfway through.

  2. Careful layout

    We measure, plan the repeat and decide where the pattern starts so motifs line up across corners, doors and windows.

  3. A clean finish

    Seams are tight, edges are trimmed cleanly at trim and ceilings, and the room is left tidy with care tips for your new walls.

FAQ

Common questions

Can you install a mural I bought online?

Yes. Most of our mural jobs use panels the homeowner ordered. We check the sequence and size against the wall before installing.

What if my wall is wider than the mural?

We can center the image and paint or paper the remaining strips in a coordinating tone, or help you reorder at the correct size.

How long does a mural take to hang?

A standard bedroom or living room wall usually takes one visit. Extra prep for textured walls can add time.

Are peel-and-stick murals worth it?

They suit renters and smooth walls. On textured or humid walls, a pasted mural usually holds up better over time.

Can a mural go on a ceiling?

It can. Ceiling murals take more setup and a second set of hands, so we plan them as their own visit.

Do you work in the cities around Lauderdale Lakes?

Yes, including Lauderhill, Oakland Park, North Lauderdale, Sunrise and Wilton Manors.

Ready to plan your wallpaper project?

Tell us about the room, the paper you have in mind and the condition of the walls. We will follow up to look at the space and map out the work.

(912) 873-9767
Call (912) 873-9767 Request Service