Skip to content

Grasscloth Wallpaper Installation for Sunrise Homes

The short answer

Grasscloth can look great in a Sunrise home if the walls are smooth, the rolls are sorted for shade before hanging, and the paste is kept off the fiber face. We handle that sorting, prep and careful hanging, and we advise on rooms where moisture makes grasscloth a poor fit.

Grasscloth is woven from natural fibers such as sisal, jute, seagrass or arrowroot and bonded to a paper backing. That texture is the reason people love it and also the reason it punishes rushed work. Every strand absorbs paste differently, the color shifts from roll to roll, and a careless sponge leaves a water mark that never comes out. True Wallpaper Installation hangs grasscloth in Sunrise living rooms, dens and bedrooms, coming about 8 miles west from Fort Lauderdale to serve the 33323 and 33351 areas. Below is what Sunrise homeowners should know before committing to a natural-fiber wallcovering, including how the inland Broward climate affects it and what we do differently compared with an ordinary vinyl or paper install.

Where Grasscloth Works in a Sunrise House

Natural fibers do best in rooms with steady air conditioning and little direct water. Living rooms, formal dining rooms, studies and primary bedrooms are the usual choices. A wall that faces a big west window can fade the fibers over time, so we sometimes suggest the opposite wall or recommend keeping the blinds angled in the afternoon.

We steer people away from grasscloth in full bathrooms, laundry rooms and kitchens behind the sink. Steam and splashes stain the weave and can loosen the backing. If you want the look in a powder room without a shower, it can work, but expect it to need gentle care.

Seams, Shading and Why Every Panel Looks Different

Grasscloth seams are visible by nature. Manufacturers say so on the label, and no installer can make them disappear the way a printed paper seam can. What we can control is how evenly they read. Before the first cut, we unroll each bolt and compare them side by side under the room's own light, then plan the order so neighboring panels blend.

We also reverse-hang alternating strips when the product calls for it. Reversing evens out the slight color gradient that runs from one edge of a bolt to the other, so the wall reads as a soft, consistent texture instead of a set of stripes.

  • Sort and number every panel before cutting
  • Check batch and lot numbers so all rolls came from one dye run
  • Plan seams away from the main sight line where possible
  • Keep a clean dry brush, not a wet sponge, on the face

Prepping Block and Drywall Surfaces

Grasscloth hides small surface flaws better than a glossy paper does, but it will not cover a heavy knockdown texture. In Sunrise we see both drywall partitions and plastered concrete-block exterior walls. We skim rough areas, sand, and seal the wall with a pigmented wallcovering primer. Tinting the primer close to the fiber color keeps tiny gaps between strands from flashing white.

Because fibers soak up paste, we use a clear, heavy-duty adhesive and apply it to the backing with care. Overpasting causes the glue to bleed through the weave, leaving dark blotches that only show once the wall dries.

Living With Grasscloth in Inland Broward Weather

Sunrise sits well inland, so salt air is less of a concern than it is on the barrier island. Humidity is the bigger factor. During the hot, wet months from May to October, a house left closed up with the air off can let fibers swell and seams open slightly. Keeping the AC running when you travel goes a long way toward keeping grasscloth tight.

If you board up or lose power during a storm between June and November, the room may get muggy for days. Minor seam lifting afterward can usually be reset; we would rather check it than have you try a damp cloth on it.

Booking an Install in Sunrise and Nearby

We hang grasscloth in Sunrise and in nearby Tamarac, Plantation, Lauderhill, North Lauderdale and Lauderdale Lakes. Order a little more than the calculated amount, since shade sorting sometimes means setting a bolt aside. Let the rolls sit in the air-conditioned room for a day before we arrive so they acclimate. On install day we protect floors, cover vents near the wall and leave the space vacuumed.

More services in Sunrise

Related

What to expect

How a visit goes

  1. Honest wall assessment

    If a surface needs stripping, skim coating or time to dry, we tell you before work begins, not halfway through.

  2. Careful layout

    We measure, plan the repeat and decide where the pattern starts so motifs line up across corners, doors and windows.

  3. A clean finish

    Seams are tight, edges are trimmed cleanly at trim and ceilings, and the room is left tidy with care tips for your new walls.

FAQ

Common questions

Are visible seams a sign of a bad grasscloth install?

Not by themselves. Natural fiber wallcoverings always show some seams. Uneven gaps, glue stains or mismatched shades next to each other are the real problems.

Can I clean grasscloth?

Dust it with a soft brush or a vacuum on low with a brush tip. Avoid water and cleaning sprays, which can stain the fibers.

Is grasscloth safe for a Florida bathroom?

We do not recommend it in bathrooms with a shower or tub. A ventilated powder room is the most we would suggest.

Why should I order extra rolls?

Shading varies between bolts, and sorting sometimes leaves one that does not blend. Extra stock also lets you repair a damaged panel later with matching material.

Do pets damage grasscloth?

Cats in particular may scratch the fibers. In homes with pets, a lower wainscot or choosing a different wall can help.

Ready to plan your wallpaper project?

Tell us about the room, the paper you have in mind and the condition of the walls. We will follow up to look at the space and map out the work.

(912) 873-9767
Call (912) 873-9767 Request Service