Skip to content

Wall Mural Installation in Sunrise, Florida

The short answer

We install custom and stock wall murals in Sunrise, laying out every numbered panel before hanging so the image stays aligned edge to edge. Accurate wall measurements, a smooth primed surface and steady AC are the keys to a clean result.

A printed mural is not hung like ordinary wallpaper. Each panel is a numbered piece of a single image, so there is no repeat to fall back on and no forgiving pattern to hide a drift. If panel three lands a quarter inch low, the horizon in your photo takes a step down. True Wallpaper Installation installs large-format murals in Sunrise homes, traveling roughly 8 miles west of our Fort Lauderdale shop to neighborhoods across 33323 and 33351. Kids' rooms with a jungle scene, a living room with a misty forest, a home gym with a city skyline: the image changes, but the method stays the same. Here is how a mural project in Sunrise usually goes and what you can do ahead of time to make it come out right.

Before You Order: Measuring for a Mural

Most mural printers ask for wall width and height and then add bleed, an extra margin around the image that gets trimmed off at the ceiling, floor and corners. We recommend measuring in three places for each dimension and using the largest number, since many homes have walls that are slightly out of square.

If you are not sure how the image will crop around a window or doorway, we can come out first, measure precisely and mark where the outlets and switches fall. That lets you shift the artwork before printing so a face or focal point does not end up behind a light switch.

  • Measure width at the top, middle and bottom
  • Measure height at both ends and the center
  • Note baseboards, crown molding and any openings
  • Ask the printer how much bleed they include

Dry Layout Comes First

When the panels arrive, we unroll them on a clean floor in order and confirm the numbering, color and overlap. Printing errors and shipping damage are far easier to deal with before paste touches anything. We then mark a plumb starting line on the wall based on the true center of the image, not the corner, because corners in Florida tract homes are rarely straight.

Some murals are designed to butt edge to edge; others overlap and are double-cut. We follow the maker's instructions for each, since the paper type and print process change how seams should be handled.

Surface Prep on Sunrise Walls

Large photographic images reveal every bump. A sprayed texture that looks fine under paint will show up as a grainy shadow across a printed sky. In many Sunrise homes we skim-coat textured drywall or plastered block before a mural goes up, then sand and prime. The primer is a bonding product made for wallcoverings, which also helps when you eventually want to take the mural down.

We check for moisture on exterior block walls too. A wall that sweats when the AC is cold and the outside air is steamy can push paste out of the seams over time, so we look for staining or bubbling paint before committing.

Climate Notes for Murals

Murals printed on non-woven or vinyl substrates handle humidity reasonably well, while thin paper prints are more sensitive. During the wet months from May through October, we keep the room cool and closed during installation and ask you to leave the AC on afterward so the paste cures evenly. Large dark images can show any shrinkage gap at seams, which is another reason consistent indoor conditions matter.

Rooms with strong afternoon sun may fade a mural over years. If the wall gets direct light, ask your printer about UV-resistant inks or laminates.

Areas We Cover

Beyond Sunrise, we install murals for homeowners in Plantation, Tamarac, Lauderhill, North Lauderdale and Lauderdale Lakes. Most single-wall murals are finished in one visit. Please clear furniture at least a few feet from the wall and keep pets and kids out of the room while panels are drying.

More services in Sunrise

Related

What to expect

How a visit goes

  1. Honest wall assessment

    If a surface needs stripping, skim coating or time to dry, we tell you before work begins, not halfway through.

  2. Careful layout

    We measure, plan the repeat and decide where the pattern starts so motifs line up across corners, doors and windows.

  3. A clean finish

    Seams are tight, edges are trimmed cleanly at trim and ceilings, and the room is left tidy with care tips for your new walls.

FAQ

Common questions

Can you install a mural I bought online?

Yes. We install murals from most printers. Share the product details so we can confirm the right adhesive and seam method.

What if my wall is a little bigger than the mural?

Small shortfalls can sometimes be handled by adjusting placement, but it is safer to reorder with correct dimensions and proper bleed.

Do murals work on textured walls?

Texture shows through most prints. We usually recommend skimming the wall smooth before installation.

Can a mural go around a corner?

It can, though the image will bend at the corner. We plan where that break falls so key parts of the picture stay on one wall.

How long before I can move furniture back?

Give it a day so the paste can set, especially during humid months.

Is a peel-and-stick mural easier?

It avoids paste, but it is less forgiving to reposition on large panels. On textured or slightly damp walls it may not hold well.

Ready to plan your wallpaper project?

Tell us about the room, the paper you have in mind and the condition of the walls. We will follow up to look at the space and map out the work.

(912) 873-9767
Call (912) 873-9767 Request Service